>V-a<
This provides examples, hint and basic outline of the examination of TESDA in Computer Hardware and Servicing NC II
5. CONFIGURE AND PRINT (Actual)
- Click on the start menu and click Control Panel
- When the control panel window opens you will see items in either Category View (Continue with step #3) or Classic View (Skip to item #4)
- Find and double click on the Network and Internet Connection icon.
- Next, find and double click on the Network and Internet Connection icons. A window will open with all network connections available on the computed (wired and wireless.)
- Find the network connection you want to manually configure, right click on it and select Properties from the pop‐up menu
- In the connection properties window, under the section labelled “This connection used the following items:” find the Internet Protocol (TCP/IP) item and double click it.
- A new window will open; select the second radio button which is labelled “Use the following IP Address”.
- Enter the appropriate IP Address (192.168.0.1); subnet mask usually 255.255.255.0 and the gateway (the router or the proxy server address).
- The next part of the windows will now have a radio button selected which is labelled “Use the following DNS server addresses”
- If you need to access the internet, enter the address provided by your ISP; if you do not have that information you can use the Open DNS server IP (208.67.222.222 and 208.67.220.220).
- After entering the required information, click the OK button twice and close the control panel window.
