CHS NC-II
>II<
This provides examples, hint and basic outline of the examination of TESDA in Computer Hardware and Servicing NC II
2.
OCCUPATIONAL HEALTH AND SAFETY PROCEDURE (Written)
- Always ground or discharge yourself before touching any part of the
computer
- Do not work alone so that there’s
someone who can take care of you in case of accident or emergency.
- Be careful with the tools that may cause short circuit
- Always full the cable connector on the handle and not on the cable
itself
- Use only rubber shoes when standing on the ground or in a concrete
floor
- Make sure that the pins are properly aligned when connecting a cable
connector.
- Always power off and unplug the computer before working on it.
- Take away any liquid such as mineral
water or soft drinks near your working area or near computers.
- Contingency measures during workplace
accidents, fire and other emergencies are recognized.
- Personal protective equipment is
correctly used in accordance with organization OHS procedures and practice.
- Hazard/risks in the workplace and
their corresponding indicators are identified to minimize or eliminate risk to
co‐workers,
workplace and environment.
- Take necessary precautions to protect
the component of the computer from damaged cause by Electrostatic Discharge
(ESD).
- Hold the components by edges and do not touch the IC’s.
- Read and follow instruction on the manual carefully.
- Do not use excessive force if things don’t quite slip into place.
